Epoxy Flooring & Industrial Floors
Heavy-duty monolithic metallic floor hardeners, epoxy & polyurethane screeds

What is industrial flooring?
Industrial flooring is a hard-wearing floor finish for factories, warehouses and food plants. For dry areas with forklift traffic, a floor hardener is trowelled into the fresh concrete. Where chemicals, oil or daily washing are common, an epoxy or polyurethane screed is laid over the concrete. The right choice depends on the traffic, the chemicals and how the floor is cleaned.
Last updated:
Why do industrial floors wear out?
Forklift rolling shear, heavy pallet drops, chemical drips, and abrasive traffic cause rapid pitting, dusting, and uneven surfaces in manufacturing and warehousing floors.
How do we fix it?
We provide dry-shake non-metallic/metallic surface hardeners troweled directly into fresh concrete, alongside solvent-free epoxy screeds and anti-microbial polyurethane floor toppings.
Which products are used?
- Vchemics Metallic Floor Hardener
- Solvent-Free Epoxy Floor Screed
- High-Build Chemical Resistant PU Topping
- Silicate Dust-Proofer & Concrete Densifier
Related: Epoxy and PU floor coatings · Repair mortars for damaged slabs · Epoxy flooring for factories guide
Where is it used?
- Automotive manufacturing lines
- Pharmaceutical Cleanrooms (cGMP)
- Heavy warehousing & logistics hubs
- Chemical processing and bottling plants
Standard Operating Protocol
How is industrial flooring done, step by step?
Substrate Profiling & Shot Blasting
Mechanical CSP 3–4 profiling and vacuum dust extraction.
Moisture Barrier Primer
Deep penetrating moisture-tolerant epoxy primer.
Screed / Hardener Layer
Application of engineered self-leveling resin or dry-shake power troweling.
Seal & Curing Sealant
Top coat sealing for stain resistance and high-gloss abrasion defense.
Site Execution Gallery
How We Worked
Step-by-step photographic breakdown of real-world site execution, obstacles managed, and progressive structural sealing.

Worker operating planetary diamond grinder on concrete floor
Diamond Grinding & Surface Profiling
Mechanical diamond grinding removes laitance and contaminants, creating a correctly profiled substrate for coating adhesion.

Worker applying epoxy crack and joint filler with a blade on concrete floor
Crack & Joint Filling
Every joint and crack is filled flush with semi-rigid epoxy filler before coating, removing weak points under forklift wheel loads.

Worker rolling penetrating epoxy primer onto concrete floor
Epoxy Primer Coat
A penetrating epoxy primer seals concrete porosity and anchors the coating system above it.

Worker rolling spiked roller across self-levelling epoxy floor
Self-Levelling Base Coat
Self-levelling epoxy is poured and spike-rolled to release entrapped air, giving a flat, seamless floor plane.

Finished high-gloss seamless epoxy warehouse floor
Topcoat & Cure
A high-build aliphatic topcoat is applied and cured, delivering a seamless, chemical- and abrasion-resistant finish ready for heavy traffic.
EXPLORE MORE DISCIPLINES
Other Engineered Solution Protocols
Basement Waterproofing Chemicals & Sealants
Permanent deep-pore crystalline & membrane envelope against hydrostatic head
Terrace Waterproofing
Seamless elastomeric PU & acrylic coatings resistant to thermal expansion & ponding
Concrete Repair
Diagnostic restoration of spalled concrete, rebar corrosion & structural cracks
Structural Rehabilitation
Engineered section enlargement, micro concrete encasements & load recovery
Protective & Architectural Painting
Industrial protective coatings and architectural finishes for lasting performance and appearance.
Schedule an On-Site Diagnostic Assessment
Our chemical application specialists visit your project site in Chennai or Tamil Nadu to evaluate substrate conditions, inspect water ingress sources, and prepare custom IS-compliant chemical specifications.






